Advertisement
Trading Fundamentals

Tick Value and Point Value Explained: Doing the Real Math Before You Trade

Mouad — EdgeQuant Trading · Oct 07, 2026 · 7 min read
Futures trading screen showing price ticks and point movements on a chart

Every futures broker shows you two numbers that look interchangeable and aren't: the tick and the point. Mix them up once in your head when you're sizing a stop, and you can misjudge your real risk by anywhere from 4x to 100x depending on the contract, because the ratio between tick value and point value is different on every single product. This isn't a rounding error — it's the single most common math mistake new futures traders make, and it's the kind of mistake that doesn't show up until you're already in the trade.

Tick Size, Tick Value, and Point Value — The Three Numbers You Need

A tick is the minimum price fluctuation the exchange's contract specification allows — the smallest increment of price movement a contract is permitted to make. A point is one full unit of the quoted price. Tick value is the dollar amount one tick is worth per contract; point value (sometimes called the multiplier) is the dollar amount one full point of price movement is worth. The relationship is simple once you see it written out: tick value × ticks per point = point value. On a contract with a quarter-point tick, four quarter-point ticks combine into one full point, and the contract specification — not any universal rule — is what determines what that movement is worth in dollars.

On the E-mini S&P 500 (ES), the tick size is 0.25 points and the tick value is $12.50. That means there are four ticks per point, so the point value is $50 (4 × $12.50). A move from 5,600.00 to 5,601.00 is one point — and it's worth $50 per contract, not $12.50. On the Micro E-mini S&P (MES), the same 0.25 tick is worth $1.25, so the point value is $5.

Now compare that to crude oil (CL). CL ticks in $0.01 increments, and each tick is worth $10. There are 100 ticks per point, so a one-point (one dollar) move in crude is worth $1,000 per contract — not $10. That's the gap that catches people: on ES, tick value multiplied up to point value is a 4x jump; on CL, it's 100x. If you've been trading equity index futures and switch to crude using the same mental math, a stop you think is "10 points" is actually either $500 (if you meant ticks) or $10,000 (if you meant points) away from where you thought it was.

Trader calculating position size and risk on a desk calculator

The Real Numbers, Contract by Contract

Here's what the math actually looks like across the contracts retail futures traders touch most, using current CME/CBOT/NYMEX/COMEX specs:

E-mini S&P 500 (ES): tick size 0.25, tick value $12.50, point value $50.
Micro E-mini S&P 500 (MES): tick size 0.25, tick value $1.25, point value $5.
E-mini Nasdaq-100 (NQ): tick size 0.25, tick value $5.00, point value $20.
Micro E-mini Nasdaq-100 (MNQ): tick size 0.25, tick value $0.50, point value $2.
E-mini Dow (YM): tick size 1 (whole points), tick value $5.00, point value $5.00 — the one major index future where tick and point value are identical, because it ticks in full points.
Micro E-mini Dow (MYM): tick size 1, tick value $0.50, point value $0.50.
E-mini Russell 2000 (RTY): tick size 0.1, tick value $5.00, point value $50.00.
Micro E-mini Russell 2000 (M2K): tick size 0.1, tick value $0.50, point value $5.00.
Crude Oil (CL): tick size $0.01/barrel, tick value $10, point value $1,000 (1,000-barrel contract).
Micro Crude Oil (MCL): tick size $0.01, tick value $1, point value $100 (100-barrel contract).
Gold (GC): tick size $0.10/oz, tick value $10, point value $100 (100 troy oz contract).
Micro Gold (MGC): tick size $0.10, tick value $1, point value $10 (10 troy oz contract).

Notice there's no pattern that lets you guess one contract's numbers from another's. YM and MYM tick in whole points, so tick value equals point value there — the one case where conflating the two terms doesn't cost you anything. Everywhere else, confusing "ticks" and "points" when you talk about a stop distance changes your actual dollar risk by a factor that ranges from 4x (ES) to 10x (RTY, gold) to 100x (crude oil).

Where This Actually Blows Up Accounts

The mistake rarely happens on contract specs — it happens in the gap between how traders talk and what their platform executes. "I'm risking 20 ticks" and "I'm risking 20 points" sound almost the same when said out loud, and a lot of trading room chat, Discord calls, and even some strategy write-ups use the words loosely. On ES, that's the difference between risking $250 and risking $1,000 per contract. On crude, it's the difference between risking $200 and risking $20,000. Prop firm traders on evaluation accounts with a $2,500-$3,000 total drawdown limit have ended evaluations in a single trade from exactly this kind of unit confusion — setting a stop they believed was in ticks when their platform's order ticket was denominated in points, or vice versa.

The other place it bites is backtesting and strategy design. If your backtest script pulls historical bars in points but your position sizing formula multiplies by tick value, your simulated P&L will be off by the ticks-per-point ratio for that specific contract, and that error compounds silently across every trade in the test. A strategy that looks profitable in a spreadsheet because of a units mismatch will not survive five minutes of live trading.

Doing the Position-Sizing Math Correctly

The formula that actually matters for risk management is: dollar risk = stop distance in ticks × tick value × number of contracts. Always convert your stop to ticks first, not points, because tick value is the number your broker's margin and P&L engine is built around. If you want to risk $200 on a trade and you're trading MES with a tick value of $1.25, an 8-tick (2-point) stop costs you $10 per contract, so you could run up to 20 contracts before hitting your risk cap on that stop distance alone — though margin and liquidity constraints will cap you well before that on a small account. If you're trading one CL contract with a 20-tick ($0.20) stop, that's $200 of risk already, with zero room to scale size.

A rule that eliminates almost all of the confusion: before you place a single live trade on a new contract, open the exchange's contract specification page, write down tick size, tick value, and point value, and run three sample stop-distance calculations by hand. It takes five minutes and it is the cheapest insurance you will ever buy in this business. Paper-trading platforms sometimes default to point-denominated displays for one contract and tick-denominated displays for another with no visual flag that the units changed — check this explicitly rather than assuming your platform is consistent across products. Most broker platforms and some futures contract specs pages also offer a built-in position size calculator next to the tick/point table; it's worth using once to sanity-check your own hand math, but don't rely on it blind, because a calculator fed the wrong stop units (ticks typed into a points field) will hand you a confidently wrong number just as fast as you can make the mistake yourself. Note also that regular trading hours and overnight electronic hours affect liquidity and realistic fill prices around your stop, independent of the tick-value math — a technically correct stop size can still execute worse than planned in a thin overnight session.

The Bottom Line

Tick value and point value aren't two names for the same thing — they're two different dollar amounts tied by a multiplier (ticks per point) that is unique to every contract, ranging from 1x on YM to 100x on crude oil. The traders who get burned by this aren't making an arithmetic error; they're making a units error, confusing what a stop "looks like" on a chart with what it costs in dollars. Before you size a position on any contract you haven't traded before, pull the actual tick value and point value from the exchange spec sheet and do the multiplication yourself. It's the single cheapest risk-management habit in futures trading, and it's the one most commonly skipped.

tick value point value futures trading position sizing contract specifications